Connection Issues FAQ

Forum to discuss iMonkey iPhone/iPod Touch client for MediaMonkey

Connection Issues FAQ

Postby Melloware » Sat Sep 13, 2008 10:02 am

If you are having connection problems trying to get iMonkey to connect to MediaMonkey here are some things to try.

1. Make sure iMonkey PC Server application iMonkey.exe is used to run MediaMonkey and not the default application. You download it here.

2. Start iMonkey PC Server. From a command prompt type "netstat -a" you should see....
Code: Select all
TCP    YOURPC:6001         YOURPC:0            LISTENING

IMPORTANT: If you do NOT see that then you have your antivirus/antispyware or Windows Defender preventing that port from being opened. You will need to add Port 6001 as an exception in whatever port blocking firewall/antivirus/Windows Defender you use.

A. Go into Control Panel->Security Center to tell Windows Firewall to allow iMonkey.exe as an Exception.

B. Disable Windows Defender from starting altogether... ... s-Defender

C. Go into Control Panel->Security Center to get to the Windows Defender options and try opening Port 6001. ... b1033.mspx

3. Once you have netstat -a showing Port 6001 is listening then your Server is all set up.

4. On the iPhone go to the Settings and enter the IP Address correctly from your iMonkey PC Server. You can find your IPV4 address by typing "ipconfig" at the command prompt. It should look like 192.168.1.XXX or something similar.


5. Now that you have pointed your iPhone/iPod Touch to MediaMonkey, try and run iMonkey on your device. If it says failed to connect then your Wireless Router is blocking Port 6001. You will need to go into your Router and change it to open up Port 6001. One user reported success by saying "It was a router issue, when I activated DHCP... port 6001 appeared in netstat and I could connect to MediaMonkey"

6. If you still can't connect then try from a different PC than MediaMonkey is running on to telnet 192.168.1.XXX 6001 using Putty or any other telnet client. If you do not see "300 iMonkey Server" response then you know your Router still has port 6001 blocked.

7. Turn Bluetooth Off: If you are having connection issues and you've done everything to date (firewall, router & defender) and it still doesn't connect I would suggest turning off your Bluetooth if it is on. I have just gone through 3 painful weeks of troubleshooting including buying a new router only to find out that the Bluetooth when turned on was affecting the network protocols somehow and causing this and another program similar to not connect.

Hope that helps!
Melloware Inc.
User avatar
Site Admin
Posts: 11103
Joined: Thu Dec 01, 2005 10:24 pm
Location: Philadelphia, Pennsylvania USA

Return to iMonkey (closed)

Who is online

Users browsing this forum: No registered users and 1 guest