[SOLVED] Status slider bar disappeared iOS 8.3

[TerriZeee]

Was a bit shocked at the flat look but it works great on my iPhone 6.

[Melloware]

Nice!

[MANOWAR©]

Is it supposed to be only part of the screen on the 6 plus? Mine is sized wrong.

[Melloware]

As I said earlier in the thread: "I also just published another version that fixes the iPhone 6 and 6 Plus screen size issues."

Just waiting on Apple to approve and publish the release. It can take Apple anywhere from 3 to 21+ days to approve a version.

[gvodvarka]

Slider works great now but I have x10 set to my router address port 6003 and it works on cellular but not on my home network. My old iPhone 4s worked perfect in and out using this setting. If I change to the home network address it works but when I leave I have to change it again. I use it for my garage opener and my alarm. I like to have the alarm and door open as I come down the street. What Gives?

[Melloware]

Slider works great now but I have x10 set to my router address port 6003 and it works on cellular but not on my home network. My old iPhone 4s worked perfect in and out using this setting. If I change to the home network address it works but when I leave I have to change it again. I use it for my garage opener and my alarm. I like to have the alarm and door open as I come down the street. What Gives?

Hmmm none of that should have changed. Are you sure your network settings did not change or your internal IP address made static? Make sure to double check by walking through this guide again.

https://www.assembla.com/spaces/mellowa ... Edge_Guide

[Melloware]

OK Apple just notified me that 1.94 was pushed to the AppStore. Let me know how it looks on Iphone 6's now.

[demoos]

Thanks for the previous fix. Works again. I have an iphone 6 plus. The blue bar is back and the product is functional, however the screen is too small, uses a little more than half of the screen. The slider status bar, buttons, and logo appear to be the correct size, but the selection area is squashed top to bottom. Not much room to get you finger in there, especially my fat fingers.

[Melloware]

Thanks for the previous fix. Works again. I have an iphone 6 plus. The blue bar is back and the product is functional, however the screen is too small, uses a little more than half of the screen. The slider status bar, buttons, and logo appear to be the correct size, but the selection area is squashed top to bottom. Not much room to get you finger in there, especially my fat fingers.

Hmmm I only have an iPhone6 and not a Plus and it looks OK on mine and in the emulator. Can you send a screenshot of what you are talking about?

[demoos]

I have a screen shot, How do I add an attachment?

[Melloware]

Oh you would have to post the image somewhere and just put the link here. THere are some free image hosting sites.

[demoos]

OK, Try this :





Or This http://dmoos.x10host.com/images/IPHONE6+.JPG

[Melloware]

That looks correct to me? That is what it is supposed to look like.

I don't think I can make the "scroll wheel" selector any bigger. IOS sizes that according to the size of your screen.

[demoos]

OK, I guess I was hoping it would be scaled to take up the entire screen, but thanks for getting it working again!!

BTW any word on when you may add multiple profiles?

[Melloware]

OK, I guess I was hoping it would be scaled to take up the entire screen, but thanks for getting it working again!!

BTW any word on when you may add multiple profiles?

I was going to tackle that with the last change but I literally spent hours getting the thing working in IOS8.3 because apple has changed so much. It's still on my list though!